|
Capturing Video Categories
| Capturing Video The actual capturing of the video is very straight forward and does not require anything special. Use either the button in the toolbar or the menu item Video Sequence under the Capture menu and you are ready to go. Attention: If there is no synchronization between the computer (RealCap module) and the VCR/camcorder it is important to capture a video sequence that is large enough to catch the whole sequence including some slack in the beginning and the end. When storing the video sequence to disk the sequence is trimmed and only the images of interest is stored. Important: When capturing video to the
harddrive to is previous said that the through put to the harddrive has to be quite high
and if this is in some way slowed down the RealCap module will loose some image/frames. If
this is the case the RealCap will give a message that frames has been dropped and the
sequence can not be used.
|
|